BlackJack Buffers Ruger 10-22 Installation Instructions

  1. Verify firearm is unloaded.
  2. Field strip per mfg. instructions
  3. Remove the 2 trigger assembly retaining pins and trigger assembly.
  4. Remove original steel bolt stop pin and replace with new urethane bolt stop pin.
  5. Reassemble firearm and check for proper cycling of action.
Disclaimer: All users (you) of any of these products assume all and total liability, risks, and responsibilities for the installation and use of these products. Warranty is limited to material and workmanship only. No other warranty is offered, expressed, or implied.
Copyright © 2004-2022 Blackjack Buffers LLC. Powered by Zen Cart