BlackJack Buffers SKS Installation Instructions

  1. Verify firearm is unloaded.
  2. Remove recoil spring cover.
  3. Remove recoil spring assembly.
  4. Place H style buffer in lower receiver with small side of “H” to the rear, flat side up.
  5. Reinstall spring assembly & cover.
  6. Cycle action to insure proper operation.
Disclaimer: All users (you) of any of these products assume all and total liability, risks, and responsibilities for the installation and use of these products. Warranty is limited to material and workmanship only. No other warranty is offered, expressed, or implied.
Back
Copyright © 2004-2017 Blackjack Buffers LLC. Powered by Zen Cart