BlackJack Buffers MINI 14/30 Installation Instructions

  1. Verify firearm is unloaded.
  2. Disassemble rifle (per owner’s manual) to the point where op rod is free. Remove op rod spring.
  3. Insert buffer over op rod spring guide, with curve against barrel. Buffer sets against front of receiver.
  4. Replace op rod spring.
  5. Reassemble rifle.
  6. Cycle action to insure proper operation.
Disclaimer: All users (you) of any of these products assume all and total liability, risks, and responsibilities for the installation and use of these products. Warranty is limited to material and workmanship only. No other warranty is offered, expressed, or implied.
Back
Copyright © 2004-2017 Blackjack Buffers LLC. Powered by Zen Cart