BlackJack Buffers AR Installation Instructions

  1. Verify firearm is unloaded.
  2. Field strip per manufacture’s instructions
  3. Remove recoil buffer assembly.
  4. Drive out buffer tip roll pin using a punch or other suitable tool.
  5. Remove old buffer tip from assembly.
  6. Install new buffer tip from assembly.
  7. Reinstall roll pin.
  8. Reinstall buffer assembly and cycle to verify proper operation.
Disclaimer: All users (you) of any of these products assume all and total liability, risks, and responsibilities for the installation and use of these products. Warranty is limited to material and workmanship only. No other warranty is offered, expressed, or implied.
Back
Copyright © 2004-2017 Blackjack Buffers LLC. Powered by Zen Cart